Reef Sculpture Part A is the Calcium half of the Reef Sculpture supplement. When used as directed (and with Part B) it will maintain calcium and buffering capacity in the same ratio found in natural seawater.
SHIPPING & DELIVERY
Reef Sculpture Part A & Reef Sculpture Part B, when used together and as directed are an ionically balanced calcium and alkalinity control system. Unlike many other products which will cause a buildup of chlorides or other ions, Reef Sculpture will maintain seawater ratios of important ions. When used as directed it will maintain calcium and buffering capacity in the same ratio found in natural seawater.
PART B: Is the Alkalinity or buffering half of the Reef Sculpture supplement. When used as directed (and with Part A) it will maintain calcium and buffering capacity in the same ratio found in natural seawater.
Shake well prior to use. Add 1 capful (5 ml) per 100 L of marine aquarium water 3 to 4 times per week. For best results, measure the calcium concentration and add as required to maintain the concentration between 410 and 450 mg/L (ppm).
This product contains no acetate, gluconates, polygluconates or other unnecessary organics to pollute your aquarium. It is phosphate and nitrate free.
Dosing through use of a drip system is a superior method of addition. Two dosing systems are required to dose part A and part B. Do not mix part A with part B or buffers or alkalinity supplements prior to addition. You may mix it with strontium, calcium, and many other supplements. Determine the amount of calcium consumption during the time it takes add the entire volume of your drip system. Determine the amount of Reef Sculpture part A to add in millilitres by multiplying your tank capacity in gallons by the amount you want to raise it in mg/l (ppm) and by 0.0667. (Example: if you have a 100 gallon tank and you want to raise the level by 10 ppm with the entire dose, you would multiply 100 x 10 x 0.0667 which equals 66.7 ml of Reef Sculpture part A or 13-1/3 capfuls).