Comes complete with an easy to use remote control. Choose from up to 8 single colours or a series of flashing or changing modes.
*Outdoor transformer sold separately
SHIPPING & DELIVERY
CLICK + COLLECT AVAILABLE
THIS ITEM CLICK AND COLLECT ONLY
PondMAX Pond Paint & Sealer contains advanced acrylic polymers and titanium nano-particles for a superior dirt and algae resistant finish.
1 litre covers up to 10 square metres, depending on your ponds surface finish.
On warm days PondMAX PaintMAX will be dry in 1 hour and can be re-coated, so the whole pond may be finished in one day. However, newly painted ponds should be left a day before filling with water.
BEFORE YOU START
Make sure your concrete pond is clean, dry and free from loose or flaky material.
Fill all large cracks with PondMAX quick setting gap filler and allow to dry.
It is advisable to use a waterproofing compound when constructing all new concrete ponds.
HOW TO USE
Stir PondMAX PaintMAX well and apply to concrete surface using brush or roller.
A second coat maybe applied the next day for superior results.
For previously painted pond surfaces, make sure all old paint is thoroughly rubbed down to provide key for new paint.Ideal temperatures for application should be between 8°C - 25°C.
Wash all brushes and equipment with water immediately and store remainder of paint in frost free conditions.
Ensure good ventilation and rain free conditions during application and drying.
Avoid contact with skin and eyes. Wear eye protection and if contacted wash off with soap and water.
If swallowed seek medical advice.
Keep out of reach of children.